
Step 1
Obtain raw metal blanks.
***WARNING***
Avoid any clear coatings such as polyurethane, laquer or varnish

Step 2
Brush or spray metal compound onto raw metal.
*** TIP ***
For consistent results ensure even coverage.

Step 3
Let dry for 3 to 5 minutes.

Step 4
Place in the laser system.

Step 5
Engrave your file.
*** TIP ***
The ULS driver contains a setting for CerMark

Step 6
Remove plate from the laser system.

Step 7
Wash off remaining marking compound with water.
